JMG 4 S EIB/KNX Mix 4-х канальный актуатор жалюзи (рольставень) с ручным управлением C/O контакты 3 A ( cos = 1) 230 V AC. Светодиодная индикаций включения/отключения канала, напряжения в шине. Базовый модуль. Управление жалюзи, рольставнями, тентами. Установка на ДИН-рейку. 10мА (с двумя модулями расширения)

4-way blind actuator MIX
Basic module MIX
Can be upgraded to maximum of 12 channels
For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
Up to 2 extension modules can be connected to a basic module
Can be combined with all MIX series devices
Free combination of switches, dimming, blinds and heating control as well as binary inputs
For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
Manual operation on device (even without bus connection)
LED Up and Down switching status display for each channel
Potential-free contacts for Up and Down per channel
Setting option for phase sequence and running time of deives
Copy function for fast configuration

Operating voltage KNX Bus voltage, 8 mA
Operating voltage 230 V AC
Stand-by consumption 1,6 W
Frequency 50 Hz
Number of channels 4
Width 4 modules
Installation type DIN rail
Type of connection KNX bus terminal
Max. cable cross section Solid wire: 0.5 mm ( 0.8) to 4 mm | Stranded wire with end sleeve: 0.5 mm to 2.5 mm
Type of contact NO contact, 3 A
Switching output Potential-free
Ambient temperature -5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 730-1