RME 8 EIB/KNX Универсальный актуатор включения/выключения и управления жалюзи. Модуль расширения для RMG8 или JMG4. 8 каналов включения/отключения нагрузок или 4 канала управления жалюзи. Возможность назначать каналы для включения/выключения нагрузок и для управления жалюзи на одном модуле. Установка на ДИН-рейку.

4- way blind or 8-way switching actuator
Extension module
For upgrading to maximum of 8 blind or 16 switching outputs
Flexible channel function selection: As switching actuator or for controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
Manual operation on device
LED switching status display on device
Manual switch for Up / Down or for Switching On / Off (also without bus voltage)
Optimised repetition accuracy of programmed lamella positions
Slip correction when moving from bottom to top
No referencing required

Operating voltage 230 – 240 V AC
Frequency 50 Hz
Stand-by consumption 1,2 W
Installation type DIN rail
Width 6 modules
Type of connection Screw terminals
Max. cable cross section Solid wire: 0.5 mm ( 0.8) to 4 mm | Stranded wire with end sleeve: 0.5 mm to 2.5 mm
Number of channels 8
Type of contact NO contact, 10 A, 6 A
Incandescent lamp load 1400 W
Halogen lamp load 1400 W
Switching output Potential-free
Ambient temperature -5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 730-1