RAM S 713 EIB/KNX Комнатный терморегулятор с возможностью ручного управления. Управление как отоплением, так и кондиционированием (PI, PWM, 2-POINS). Управление актуаторами термоэлектрических приводов, непосредственное управление электро-механическими приводами. Светодиодная индикация режима работы. Три бинарных входа для подключения кнопок управления димированием, жалюзи или подключения датчиков температуры в помещении или датчика температуры пола. Наружная установка

Individual room thermostat
For controlling heating actuators or motorised actuators
Can be used as a continuous or two point control (can also be combined).
Continuous PI control can be configured for 2 stage heating (basic and additional stage, e. g. underfloor heating and radiators) or for heating and cooling (radiators and cooling surfaces)
Two rotary controls are included in delivery: a numerical scale (mounted) and a relative scale (enclosed)
Rotary control can be limited mechanically or via parameters
Manual override button for presence or operation modes: comfort, stand-by, temperature reduction at night, frost protection
3 binary inputs for conventional switches/sensors (switching, dimming, blinds), also for externeal temperature sensor, window contact or presence signal
Temperature sensor can be connected to give remote temperature reading
LED (red) for heating mode, (blue) for cooling mode
With integrated bus coupling unit

Operating voltage KNX Bus voltage, 10 mA
Type of connection Bus connection: KNX bus terminal | Sensor connection: Terminal screws
Installation type Surface-mounted
Ambient temperature +0 °C … +50 °C
Measuring range temperature +0 °C … +40 °C
Setting range temperature +10 °C … +28 °C
Number of inputs 3
Type of protection IP 20
Protection class II according to EN 60 730-1