SME 2 S EIB/KNX Модуль расширения. 2-х канальный светорегулятор для управления ЭПРА. Характеристики аналогичны базовому модулю SMG2. Установка на ДИН-рейку.

2-way 1-10 V control unit MIX
Extension module MIX
For upgrading to maximum of 6 channels
Free combination of switches, dimming, blinds and heating control as well as binary inputs
Switching and dimming of lighting circuits in combination with electronic ballasts (EBs and ballasts LED)
1-10V inputs and one switch output (relay contact) per channel
LED switching status display for each channel
Manual switch with On/Off/Bus settings (also without bus voltage)
With crossover switching to spare the relay contact

Operating voltage 230 V AC
Frequency 50 Hz
Stand-by consumption 1,6 W
Width 4 modules
Installation type DIN rail
Type of connection Screw terminals
Max. cable cross section Solid wire: 0.5 mm ( 0.8) to 4 mm | Stranded wire with end sleeve: 0.5 mm to 2.5 mm
Number of channels 2
Type of contact NO contact, 16 A, 10 A
Opening width < 3 mm
Switching output Potential-free
Voltage output 230 V AC
Frequency output 50 Hz
Switch-on power output max. 400 A (150 µs), 200 A (600 µs)
Resistive load 3680 W
Incandescent/halogen lamp load 2500 W
Capacitive load 140 µF
Voltage input 1 – 10 V
Signal current input max. 100 mA per channel
Signal duration Continuous
Max. cable length 500 m
Ambient temperature -5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 730-1