DMG 2 S EIB/KNX Mix Базовый модуль. 2-х канальный универсальный светорегулятор (диммер) для ламп накаливания, галогенных ламп 220V и галогенных ламп 12V с обмоточными или электронными трансформаторами. Автоматическое определение типа подключенной нагрузки на каждом канале. 2х300 VA или 1х500 VA. Встроенная защита от кор.замыканий. Светодиодная индикация. Ручное переключение OFF-BUS-ON. Установка на ДИН-рейку. 10мА (с двумя модулями расширения)

2-way universal dimmer actuator MIX
Basic module MIX
Can be upgraded to maximum of 6 channels
For dimming incandescent lamps, LV and HV halogen lamps
Also suitable for dimming of dimmable energy-saving lamps
Also suitable for controlling fans
Up to 2 extension modules can be connected to a basic module.
Can be combined with all MIX series devices
Free combination of switches, dimming, blinds and heating control as well as binary inputs
Dimming output: 2 x 300 W/VA or 1 x 500 W/VA
If the DMB 2 S KNX 'Dimbooster' is used, the dimming output per device can be doubled to: 2 x 600 W/VA or 1 x 1,000 W/VA
LED switching status display for each channel
Manual switch with On/Off/Bus settings (also without bus voltage)
Automatic load detection (can be deactivated)

Operating voltage KNX Bus voltage, 10 mA
Operating voltage 230 V AC
Frequency 50 Hz
Stand-by consumption 0,5 W
Width 4 modules
Installation type DIN rail
Type of connection KNX bus terminal
Max. cable cross section Solid wire: 0.5 mm ( 0.8) to 4 mm | Stranded wire with end sleeve: 0.5 mm to 2.5 mm
Number of channels 2
Lamp types Incandescent, low-voltage and high-voltage halogen and dimmable energy saving lamps
Switching capacity per channel 300 W/VA
Switching capacity in parallel operation 500 W/VA
Switching capacity min. 20 W/VA, 7 W/VA (ESL)
Switching capacity energy saving lamps max. 2 x 60 W oder 1 x 100 W
Max. cable length 100 m
Fuse Automatic cut-out characteristic B 16 A
Ambient temperature -5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 730-1