PresenceLight 180 датчик присутствия 220В, настенный, белый, IP 54


Presence detector (PIR)
Detection area 180°
Wall installation
Mixed light measurement
Light switch output (relay, 230 V)
Automatic lighting control
Lighting control with light threshold value and self-learning switch-off delay
Pulse function for staircase time switch
Can be configured remotely
The switching behaviour of the presence detector is controlled by presence and light
The self-learning switch-off delay adjusts to occupants' behaviour
The pulse function is for controlling a staircase time switch
The presence detector has a mixed light measurement and is suitable for switching the following types of lamp: Fluorescent lamps (FL/PL), halogen and incandescent lamps as well as LEDs
Test operation mode checks the detection area and installation
The parameters can either be set using the potentiometer or via the optional service remote control QuickSet plus

Operating voltage 230 V AC
Frequency 50 Hz
Recommended installation height 1,6 – 2,2 m
Installation type Wall installation
Power consumption 0,9 W
Light measurement Mixed light measurement
Setting range brightness 10 – 1500 lx
Light switch-off delay Impuls (0,5 s), 10 s-20 min
Type of contact light Relay 230 V
Lamps Incandescent/halogen lamps, fluorescent lamps, energy saving lamps, LEDs
Resistive load 1400 W
Incandescent/halogen lamp load 1200 W
Compact and flourescent lamps 960 VA (cos f = 0,8), 580 VA (cos f = 0,5)
Compact and flourescent lamps (Number of electronic ballasts) 10 x (1 x 58 W), 5 x (2 x 58 W), 16 x (1 x 36 W), 8 x (2 x 36 W), 16 x (smaller than 36 W)
Type of connection Screw terminals
Max. cable cross section 2 x 2,5 mm
Mounting plate 70 x 70 mm
Size of concealed housing 55 mm (NIS, PMI)
Ambient temperature -20 °C … +50 °C
Type of protection IP 54