LU 133 EIB/KNX 10-и канальный датчик освещенности. 4 канала для подключения KNX датчиков, 6 логических каналов. 4 кнопки для настройки порогов и задержек срабатывания. Установка на ДИН-рейку. 10мА

Light level controller
External light sensor included in delivery
For brightness-dependent controlling
10 channels
4 threshold values channels for connecting external KNX-sensors (e.g. temperature)
6 logic channels
Up to 3 lights sensors can be connected
Manual operation on device
4 keys for setting threshold and switch on/off delay
DuoFix spring terminals
For 2 conductors each
Wire or strand (with or without wire end sleeve)
Wire diameter: 0.5 - 2.5 mm
Button for releasing plug-in connection
Display back light (can be turned off)
Thresholds can be shown or changed on display
PIN coding

Operating voltage 110 – 240 V AC
Frequency 50 – 60 Hz
Operating voltage KNX Bus voltage, 10 mA
Stand-by consumption 0,8 W
Measuring range brightness 1 – 100000 lx
On/off switching delay 0 – 20 min
Number of channels 10
Width 3 modules
Installation type DIN rail
Type of connection Bus connection: KNX bus terminal | Sensor connection: DuoFix spring terminals
Max. cable cross section 2 x 0.75 mm
Max. cable length to sensor 100 m
Ambient temperature -5 °C … +45 °C
Protection class II
Type of protection IP 20