LUXA 103-200 T датчик движения, угол 200°, врезной настенный монтаж


Motion detector (PIR)
Automatic lighting control based on presence and brightness
Wall installation
Compatible with branded switches, replaces conventional light switches
2 wire connection, ideal for retrofitting
Light switch output (triac, 230 V AC)
Mixed light measurement suitable for incandescent and halogen lamps (no electronic ballast)
Detection area can be limited using enclosed segments
Manual AUTO/ON/OFF switching by simple adjustment of cover flap
Teach-in of current brightness value
Advance shut-off warning through dimming 15 seconds before light switches off
Instant start-up possible via factory preset
No unintentional adjustment due to covered up controls
Adjustable brightness switching value and switch-off delay
Sensitivity can be reduced to limit detection area
Impulse function
Test function

Operating voltage 230 V AC
Frequency 50 Hz
Stand-by consumption 0,7 W
Light measurement Mixed light measurement
Number of channels 1
Type of contact Triac
Installation type Flush-mounted wall installation
Setting range brightness 10 – 1000 lx Infinitely adjustable
Switching capacity light

2 A (at 230 V AC, cos = 1),
Detection angle 200°, circular
Recommended installation height 1,2 – 2 m
Light switch-off delay 20 s–30 min
Incandescent lamp load 400 W
Lamps Incandescent/halogen lamps
Ambient temperature +0 °C … +45 °C
Protection class II
Type of protection IP 40