Solenoid valves for gaseous and liquid media.
Normally closed, also stainless steel 1.4410
Function is not dependent on a specific minimum differential pressure; the valves operate correctly with no pressure, at slight differential pressure, right through to maximum pressure.
They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance.
The valves are also suitable for use in heating and cooling circuits.
Power socket included.
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Materials Casing: brass, internal parts: stainless steel
Alternatively: Casing: stainless steel 1.4410, internal parts: stainless
steel
Sealing material: Perbunan
Mounting position: Any, solenoid system preferably upright
Temperature of medium: -10°C to 90°C
Max. ambient temperature: 55°C
Max. viscosity: Approx. 21 mm2/s
Power consumption:100 to 120 VA (start); 25 VA/12 W (operation)
Operating frequency: Up to 50 cycles per minute
Duty cycle: 100% ED
Electrical connection: Angled plug to DIN EN175301
Voltage/current type: Standard version 230 V, 45–60 Hz
Protection class: IP 65 according to DIN EN60529 with plug